Home > Products > Warewashing > Sinks, Dishtables
Sinks, Dishtables
Sort By:
Page of 7
18-53C 18-64C HSA-10-FE
Standard 1800 Series, Underbar Sink Unit, three compartment, 60"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, 4" O.C. splash mount faucet with swing spout (low lead compliant), apron on front & sides, (3) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Standard 1800 Series, Underbar Sink Unit, four compartment, 72"W x 18-1/2"D, 3-1/2"H backsplash, 10" wide x 14" front-to-back x 10" deep compartments, 12" embossed drainboards on left & right, 4" O.C. splash mount faucet with double jointed spout (low lead compliant), apron on front & sides, (4) removable overflow standpipes, stainless steel construction, galvanized legs with adjustable plastic bullet feet, NSF Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, basket drain, deep-drawn positive drain sink bowl, 7-1/2"High backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF
HSA-10-F 7-PS-23 7-PS-62
Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF Hand Sink, wall model, 9" wide x 9" front-to-back x 5" deep bowl, 20 gauge 304 series stainless steel, splash mounted faucet, drain with strainer plate & 1-1/2" IPS connection, NSF, cCSAus Hand Sink, wall model, 14" wide x 10" front-to-back x 5" deep bowl, 20 gauge 304 series stainless steel, splash mounted gooseneck faucet, knee valve, basket drain, wall bracket, NSF, cCSAus
1B184 2B244-1D24R 3B244-1D24R
Sink, (1) 18"W x 18" front to back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF "B" Series Sink, 2-compartment, 76"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (1) 24" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
E1S8-1620-12R18 E2S8-1620-12R18 E2S8-24-14L24
E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E3S8-1620-12T18 E3S8-18-12 E3S8-18-12T18
E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
B6C-22 E3S8-1620-12R18 E3S8-18-12R18
2200 Series Underbar Sink Unit, three compartment, 72"W x 24"D x 33-1/2"H, 304 stainless steel construction, 10"W x 14" front-to-back x 10" deep seamless deep-drawn compartments, 18-1/2" drainboards on left & right, 4-1/2"H backsplash with rear deck, bullnose front edge, 4" O.C. splash mount faucet with 10" spout, includes 1-1/2"Drains & removable overflow standpipes, galvanized steel back panel, galvanized steel legs with adjustable bullet feet, NSF E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E3S8-24-14L24 E3S8-24-14R24 E3S8-24-14T24
E-Series Compartment Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
B6C-4-22 E2S8-18-12R18 E2S8-18-12T18
2200 Series Underbar Sink Unit, four compartment, 72"W x 24"D x 33-1/2"H, 304 stainless steel construction, 10"W x 14" front-to-back x 10" deep seamless deep-drawn compartments, 12-1/2" drainboards on left & right, 4-1/2"H backsplash with rear deck, bullnose front edge, (2) 4" O.C. splash mount faucets with 10" spouts, includes 1-1/2"Drains & removable overflow standpipes, galvanized steel back panel, galvanized steel legs with adjustable bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E2S8-24-14R24 2B244-1D24L 3B184-1D18L
E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF "B" Series Sink, 2-compartment, 76"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (1) 24" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
E1S8-24-14 E2S8-1620-12L18 E2S8-18-12L18
E-Series Compartment Sink, (1) 24"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF